Discount Pool Zone
        Swimming Pool Supplies & Parts



Pool Supplies

Home
Pool Cleaners
Complete Pool Filters

Replacement Filters
     Cartridges & DE Grids
Pool Pumps
Pool Motors
Pool Timers
Pool Lights
Pool Accessories
Pool Test Kits
Pool Valves (Multiport)
Pool Chlorinators
Pool Salt Generator
Pool Pump/Skimmer Baskets
Chemicals
    Pool
    Spa
Pool Solar Blankets
Parts
     Pump/Filter
   Pool Cleaners
      Pool Vac/Navigator
      Baracuda
      Sta-Rite Great White
      Kreepy Krauly
   O-Rings



Merchant Services
        Pool Pump Motors

     A.O. Smith Replacement Motors

 GE MOTORS
Now Marathon
 
.
      
CHECK IT OUT

Important: Total output (HP x service factor) of replacement motor must equal or exceed motor being replaced

Hayward

Super Pump
Super II Pump
Max-Flo Pump
NorthStar Pump
Power-Flo LX Pump
Power-Flo Matrix Pump

Pentair/Pac-Fab

Pinnacle Pump
Ultra Flow Pump
Challenger Pump
Whisper Flo Pump
Sta-Rite

Dura-Glas Pump
Max-E-Glas Pump
Dura-Glas II Pump
Max-E-Glas II Pump
Dyna-Glas Pump
Dyna-Max Pump

Inground Swimming Pool Motors

Motor Cover

Square Flange Threaded  Shaft
Low Service Factor (Up-Rated)
Stock Number
HP
RPM
Volts
Max Amps
Service Factor
Frame
Price

USQ1052
1/2
3450
115/230
8.2/4.1
1.3
48Y
$129.99
USQ1072
3/4
3450
115/230
11.8/5.9
1.27
48Y $143.99
USQ1102
1
3450
115/230
14.8/7.4
1.25
48Y $153.99
USQ1152
1-1/2
3450
115/230
19.2/9.6
1.1
48Y $163.99
USQ1202
2
3450
208-230
10.4
1.1
48Y $213.99
USQ1252
2-1/2
3450
230
11.2
1.0
48Y $263.99

High Service Factor
Stock Number
HP
RPM
Volts
Max Amps
Service Factor
Frame
Price

SQ1072
3/4
3450
115/230
14.8/7.4
1.65
48Y
$169.99
SQ1102
1
3450
115/230
19.2/9.6
1.65
48Y $189.99

SQ1152
1-1/12
3450
115/230
10.4
1.47
48Y $229.99

(Out of Stock)
SQ1202
2
3450
208-230
11.2
1.3
48Y $269.99
SQ1302
3
3450
230
15.4
1.15
56Y
$319.99

(Out of Stock)

Centurion Sq Flange "1081" Up-Rated Low Service Factor
Stock Number
HP
RPM
Volts
Max Amps
Service Factor
Frame
Price

B852
3/4
3450
230/115
5.4/10.8
1.25
56Y
$159.99
B853
1
3450
230/115 7.1/14.2
1.25
56Y $169.99
B854
1-1/2
3450
230/115 8.0/16.0
1.1
56Y $179.99




C-Framed (Round) Threaded Up Rated

Low Service Factor
Stock Number
HP
RPM
Volts
Max Amps
Service Factor
Frame
Price

UST1072
3/4
3450
115/230
11.0/5.5
1.0
56J
$143.99
UST1102
1
3450
115/230
15.0/7.5
1.0
56J $153.99
UST1152
1-1/12
3450
115/230
18.6/9.3
1.0
56J $163.99
UST1202
2
3450
115/230
19.4/9.7
1.0
56J $213.99
UST1252
2-1/2
3450
208-230
11.2
1.0
56J $263.99

High Service Factor
Stock Number
HP
RPM
Volts
Max Amps
Service Factor
Frame
Price

ST1072
3/4
3450
115/230
15.0/7.5 1.5
56J
$169.99
ST1102
1
3450
115/230
18.6/9.3 1.5
56J $189.99
ST1152
1-1/12
3450
115/230
19.4/9.8 1.5
56J $229.99
ST1202
2
3450
208-230
12.6-11.4
1.3
56J $269.99
ST1302
3
3450
230
14.4
1.15
56J $319.99

Centurion C-Frame "1081" Full-Rated
Stock Number
HP
RPM
Volts
Max Amps
Service Factor
Frame
Price

B127
3/4
3450
230/115
6.0/12.0
1.25
56J
$149.99
B128
1
3450
230/115 7.2/14.4
1.4
56J $169.99
B129
1-1/2
3450
230/115 9.2/18.4
1.3
56J $199.99

Motor Failure:

Shaft seal failure is the major cause of motor failure. This allows moisture to go back to the motor causing corrosion and much more. One of the causes of a shaft seal going bad is the result of the pump running dry which heats up all the parts inside the pump causing damage. It's always best to replace the shaft seal when installing a new motor. If the motor fails due to water damage it can void the manufactures warranty.

ATTENTION: Improperly wiring a motor will cause irreversible damage. If the motor runs slowly then trips out, it is incorrectly wired. Please carefully read the motor name plate regarding the connections. 115/230 volt motors are shipped from the factory connected for 230 volts. A motor connected for 115 volts that has 230 volts applied will burn up immediately. A motor connected for 230 volts that has 115 volts applied will run slowly and trip out. If the wires moved on the connection board are not replaced on the proper terminals, the result will be a slow running motor that overheats and trips out. These motors have automatic overload protection, which means the motor will not run again until it cools down. If you are experiencing problems, please recheck the connections to insure you have the motor properly wired for the incoming voltage. These motors have been test run at the factory, and they very rarely have problems. Problems are almost always related to improper wiring or other installation issues. Please be sure that you are ordering the correct motor and that follow all installation instructions carefully.

 
It's always a good idea to replace the Shaft Seal while you have the pump apart. Shaft Seals run $8.99.
Click Here to match the shaft seal to your pump.








                 

Policies           Shipping          Contact

Discount Pool Zone, LLC
611 Overhill Dr
Brandon, FL 33511
Local 813.689.5800
Toll Free 877.222.6122

Your Discount Swimming Pool Supplies Headquarters