Attention: GE Motors by Regal Beloit has a new name Marathon electric

These Pool Pump Motors Come with a   18 Month Manufacturer Warranty

HP	A.O. SMITH	FRANKLIN	G.E.	CENTURY	Sta-Rite
1/2	USQ1052	19714	C1243	B856	A100CLL
3/4	USQ1072	16858	C1244	B852	A100DLL
1	USQ1102	13557	C1245	B853	A100ELL
1.5	USQ1152	13773	C1246	B854	AE100FLL
2	USQ1202	18254	C1247	B855	AE100GLL
2.5	USQ1252	13280	C1284	B840	AE100G5LL

HP	A.O. SMITH	FRANKLIN	G.E.	CENTURY
3/4	UST1072	54022	C1321	B995
1	UST1102	54023	C1318	B996
1.5	UST1152	54024	C1319
2	UST1202	12018	C1320	B998
2.5	UST1252	12020	C1149	B999

These motors carry a 18 month manufacturers warranty.
Water damage not covered under warranty (Click for photos)

Swimming Pool Motor Applications

Description
GE Commercial Motors (Now Marathon electric) by Regal-Beloit offers a full family of pool motors for commercial and residential swimming pool pumps, consisting of both single and two compartment models. The single compartment motor features a permanent split capacitor, no start switch design, while the two compartment motor incorporates the unique features desired by the service industry. The motor will run for years, but when service is necessary, repair is a breeze.

Features and Benefits
• Unique two-compartment design with cover and base plate of impact resistant Noryl® also resists moisture and corrosion with superior insulating properties that lasts for years.

• Unique voltage change selector eliminates misconnections.

• Only two switches and start capacitor ratings for reduced inventory of parts.

• Base plate provides easy-access channel that guides the leads into position for quick connections to simple terminals.

• Easy access to start switch, capacitor, terminal connections, shaft and voltage change switch by loosening one captive screw.

• Start switch uses an internal centrifugal mechanism tested in over a million starts.

• Highly resistant to moisture and contamination, the switch never needs adjustment to maintain perfect contact alignment.

• Only two switch designs: one for single speed designs, one for two speed designs.

• Start capacitors are standardized into only two ratings: one for single speed designs, one for two speed designs.

• Precision-machined shafts of 303 stainless steel with both a screwdriver slot and double flats on the opposite drive end.

• The impeller can be assembled or disassembled using either a screwdriver or 1/2 inch wrench.

• The Class B insulation system is designed for years of trouble-free service in high-moisture applications.

• All motors are thermally protected.

• An internal heavy-duty fan provides flow-through ventilation for fast, efficient cooling.

• Single compartment PSC designs (no start switch) have quick voltage change device easily accessible under terminal box cover.