Discount Pool Zone
        Swimming Pool Supplies & Parts

Pool Supplies

Pool Cleaners
Pool Filters
Filter Elements
Filter Cartridges
DE Grids

Pool Pumps
Pump Motors
Spa Blowers
Pool Lights
Pool Accessories
Pool Test Kits
Valves (Multiport)
Pool Chlorinators
Salt Generator
Pump Baskets
Skimmer Baskets
Pool Chemicals
Spa Chemicals
Pool Solar Blankets

Pumps/Fillters Parts

Pool Cleaners
  Pool Vac Navigator
  Hayward Aquabug
  StaRite Great White
  Kreepy Krauly


Anthony Apollo DE Filter Grids


The Anthony Apollo replacement rectangular DE Grids w/ Center Hub Port

Filter Description Sq Ft
Length Set P.N.

Anthony Apollo VA26
(6) FG-2413/FC-9740
Anthony Apollo VA32 32
(6) FG-2413/FC-9740
(1) FG-2417/FC-9750
Anthony Apollo VA38 38
(6) FG-2413/FC-9740
(2) FG-2417/FC-9750
Anthony Apollo VA52 52
(4) FG-2413/FC-9740
(6) FG-2417/FC-9750



Q. Why not re-cover used D.E. grids? It certainly should be cheaper than buying a new set, and everybody wants to recycle, right?

A. That sounds good, but let's examine the facts. D.E. grids are made with a specially woven polypropylene cloth cover over a styrene plastic frame. In time, the plastic frame and grid cloth are oxidized by chlorine, weakened by acid and degraded by UV exposure. Therefore, depending on maintenance, water temperature, and the chemical environment, grids can last anywhere from 6 months to 15 years (and longer).

How long will a re-covered grid last? How old is the frame? 6 months or 15 years? How brittle is the plastic? All you really know is that the fabric has failed. That's why the grid was re-covered. Since the frame was subjected to the same conditions as the fabric, can its failure be far behind?

But the re-covered grid looks new. The exposed collar is often sanded or polished to appear new. However, plastics are porous and when the skin is broken they absorb moisture, further weakening the frame. In addition, some re-covered grids are made from two or more broken frames which have been cut and glued together. Can you be sure the reassembled grid is the correct length? One grid out of spec will result in D.E. bypass.

A recovered grid may be cheaper, but can you really afford it?


Q. What is the covering material used on D.E. filter grids and is this a special fabric?

A. The cloth used on Unicel's D.E. grids is 100% Polypropylene. This fiber, a member of the Polyolefin family, has excellent resistance to acids, alkalis, and abrasion, in addition to being both rot and mildew resistant. The use of polypropylene cloth for swimming pool filtration was originally developed by Meissner Mfg. Co. (Unicel's parent company) during the 1950s. Throughout the forty-year span that polypropylene cloth has been used in this application, this fabric has gone through several modifications. Improvements to critical properties such as yarn construction, weave pattern, and fabric finishing have allowed us to better control the fabric's "permeability" in order to optimize the D.E. cake handling characteristics. Permeability is the cloth's flow resistance, expressed in "cubic feet per minute" of airflow as measured with a Frazier permeability machine.

If D.E. grid cloth has too low a permeability, it will blind off quickly, resulting in short filter runs and frequent backwashing. On the other hand, if the material has too high permeability, D.E. can bleed back into the pool. For this reason, all polypropylene grid cloth used by Unicel (and Meissner Mfg.) is woven and finished to our exacting permeability specifications. As a result, we can assure the user the optimum in filtration efficiency, dirt holding, and cake release properties without D.E. kick back or short filter runs.


Policies           Shipping          Contact

Discount Pool Zone, LLC
611 Overhill Dr
Brandon, FL 33511
Local 813.689.5800
Toll Free 877.222.6122

Your Discount Swimming Pool Supplies Headquarters